Headlamp High/Low-Beam Changer

Changer): Push the turn signal/lane change lever away from you (Headlamp High/Low-Beam Changer): Push the turn signal/lane change lever away from you and release, to turn the high beams on. To return to low beams, push the lever again or pull it toward you and release.

This indicator light turns on in the

This indicator light turns on in the instrument panel cluster when the high-beam headlamps are on.

    See also:

    Power Seats
    Power Seats To adjust the seat: • Move the seat forward or rearward by moving the horizontal control forward or rearward. • Raise or lower the front or rear part of the seat cushion b ...

    Programming Transmitters to the Vehicle
    Only RKE transmitters programmed to the vehicle will work. If a transmitter is lost or stolen, a replacement can be purchased and programmed through your dealer. The vehicle can be reprogrammed so ...

    SBZA Detection Zones
    The SBZA sensor covers a zone of approximately one lane over from both sides of the vehicle, 3.5 m (11 ft). This zone starts at each side mirror and goes back approximately 5 m (16 ft). The hei ...