How to Detect a Tamper Condition

If  horn is pressed and the horn sounds, an attempted break-in occurred while the system was armed.

If the alarm has been activated, a message will appear on the DIC.

See Anti-theft Alarm System Messages for additional information.

    See also:

    Programming without a Recognized Transmitter (Keyless Access Vehicles Only)
    If there are no currently recognized transmitters available, follow this procedure to program up to five transmitters. This feature is not available in Canada. This procedure will take approximate ...

    How to Inspect the Engine Air Cleaner/Filter
    To inspect the air cleaner/filter, remove the filter from the vehicle and lightly shake the filter to release loose dust and dirt. If the filter remains covered with dirt, a new filter is re ...

    Certification Label
    Label Example A vehicle-specific Certification label is attached to the driver side center pillar (B-pillar). The label tells the gross weight capacity of the vehicle, called the Gross Vehicle Weig ...