Delayed Locking

When locking the doors with the power lock switch and a door is open, the doors will lock five seconds after the last door is closed. You will hear three chimes to signal that the delayed locking feature is in use.

Pressing the power lock switch twice or the lock button on the RKE transmitter twice will override the delayed locking feature and immediately lock all the doors.

This feature will not operate if the key is in the ignition.

This feature can be programmed by using the Driver Information Center (DIC). See “Delayed Door Lock” under Vehicle Personalization.

    See also:

    Towing a Trailer
    WARNING: The driver can lose control when pulling a trailer if the correct equipment is not used or the vehicle is not driven properly. For example, if the trailer is too heavy, the brakes may ...

    How the System Works
    LDW uses a camera located between the inside rearview mirror and the windshield to detect the lane markings. (Lane Departure Warning): To turn LDW on and off, press the LDW control, located ...

    Engine Cooling When Trailer Towing
    The cooling system may temporarily overheat during severe operating conditions. See Engine Overheating . ...