Traction Control System (TCS)
The traction control system limits wheel spin. The system turns on automatically every time the vehicle is started.
• To turn off traction control, press
and release the Traction Control
System (TCS)/StabiliTrak button
located on the console to the
right of the shift lever
.
illuminates and the appropriate DIC message is displayed. See Ride Control System Messages.
• Press and release the TCS/StabiliTrak button again to turn on traction control.
For more information, see Traction Control System (TCS).
See also:
Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire
(Not Punctured)
To use the air compressor to inflate
a tire with air only and not sealant:
If a tire goes flat, avoid further tire
and wheel damage by driving slowly
to a level place. Turn on the hazard
wa ...
ENGINE OIL HOT, IDLE
ENGINE
This message displays when the
engine oil temperature is too hot.
Stop and allow the vehicle to idle
until it cools down. ...
Brake System Warning Light
The vehicle brake system consists of two hydraulic circuits. If one circuit is not working, the remaining circuit can still work to stop the vehicle. For normal braking performance, both circuits need ...