Buying New Tires
GM has developed and matched specific tires for the vehicle.
The original equipment tires installed were designed to meet General Motors Tire Performance Criteria Specification (TPC Spec) system rating. When replacement tires are needed, GM strongly recommends buying tires with the same TPC Spec rating.
GM's exclusive TPC Spec system considers over a dozen critical specifications that impact the overall performance of the vehicle, including brake system performance, ride and handling, traction control, and tire pressure monitoring performance. GM's TPC Spec number is molded onto the tire's sidewall near the tire size. If the tires have an all-season tread design, the TPC Spec number will be followed by MS for mud and snow. See Tire Sidewall Labeling for additional information.
GM recommends replacing all the tires at the same time.
Uniform tread depth on all tires will help to maintain the performance of the vehicle.
Braking and handling performance may be adversely affected if all the tires are not replaced at the same time. See Tire Inspection and Tire Rotation for information on proper tire rotation.
WARNING
Tires could explode during improper service. Attempting to mount or dismount a tire could cause injury or death. Only your dealer or authorized tire service center should mount or dismount the tires.
WARNING
Mixing tires of different sizes, brands, or types may cause loss of control of the vehicle, resulting in a crash or other vehicle damage. Use the correct size, brand, and type of tires on all wheels.
WARNING
Using bias-ply tires on the vehicle may cause the wheel rim flanges to develop cracks after many miles of driving.
A tire and/or wheel could fail suddenly and cause a crash.
Use only radial-ply tires with the wheels on the vehicle.
If the vehicle tires must be replaced with a tire that does not have a TPC Spec number, make sure they are the same size, load range, speed rating, and construction (radial) as the original tires.
Vehicles that have a tire pressure monitoring system could give an inaccurate low-pressure warning if non-TPC Spec rated tires are installed.
See Tire Pressure Monitor System .
The Tire and Loading Information label indicates the original equipment tires on the vehicle. See Vehicle Load Limits for the label location and more information about the Tire and Loading Information label.
See also:
Turn and Lane-Change Signals
An arrow on the instrument
panel cluster flashes in the
direction of the turn or
lane change.
For vehicles with the side blind zone alert system, an
arrow in the outside mirror flashes when ...
Safety Belt Care
Keep belts clean and dry.
WARNING!
Do not bleach or dye safety belts.
It may severely weaken them. In
a crash, they might not be able to
provide adequate protection.
Clean safety belts only wi ...
Order of Play
Tracks are played in the following order:
• Play begins from the first track in the first
playlist and continues sequentially through
all tracks in each playlist. When the last track
of the la ...