Adjusting the Speakers (Balance/Fade)

AUDIO: To adjust the balance between the right and the left speakers, push and release the AUDIO knob until BAL (balance) displays.

Turn the knob to move the sound toward the right or the left speakers.

To adjust the fade between the front and the rear speakers, push and release the AUDIO knob until FADE displays. Turn the knob to move the sound toward the front or the rear speakers.

To adjust the balance or the fade to the middle position while it is displayed, push the AUDIO knob, then push it again and hold it until you hear one beep.

To adjust all tone and speaker controls to the middle position, push and hold the AUDIO knob when no tone or speaker control displays.

ALL CENTERED displays and a beep sounds.

    See also:

    Setting the Clock (Radio with CD and Touchscreen)
    The clock is in the center stack display. To set the time: 1. Press the CONFIG button to enter the menu options or press . Turn the TUNE/MENU knob to scroll through the available setup features. ...

    What to Add
    When you do need brake fluid, use only DOT-3 brake fluid. Use new brake fluid from a sealed container only. Always clean the brake fluid reservoir cap and the area around the cap before removing i ...

    Gasoline Specifications (U.S. and Canada Only)
    At a minimum, gasoline should meet ASTM specification D 4814 in the United States or CAN/CGSB-3.5 or 3.511 in Canada. Some gasolines contain an octane-enhancing additive called methylcyclopen ...