RDS Messages
INFO (Information): If the current station has a message, the information symbol displays.
Press this button to see the message. The message can display the artist, song title, call in phone numbers, etc.
If the entire message is not displayed, parts of the message appears every three seconds.
To scroll through the message, press and release the INFO button. A new group of words displays after every press of the button. Once the complete message displays, the information symbol disappears from the display until another new message is received. The last message can be displayed by pressing the INFO button. The last message can be viewed until a new message is received or you can tune to a different station.
See also:
DIC Operation and Displays
The DIC has different displays which can be accessed by using the DIC buttons
on the turn signal lever, located on the left side of the steering wheel. The DIC
displays trip, fuel, and vehicle sys ...
Programming without a
Recognized Transmitter (Keyless
Access Vehicles Only)
If there are no currently recognized
transmitters available, follow this
procedure to program up to five
transmitters. This feature is not
available in Canada. This procedure
will take appro ...
Tire Pressure for High-Speed Operation
WARNING
Driving at high speeds, 160 km/h (100 mph) or higher, puts an additional strain on tires.
Sustained high-speed driving causes excessive heat buildup and can cause sudden tire failure.
Yo ...
