Instrument Panel Brightness
Press the knob located next to the exterior lamps knob to extend it.
Turn the knob to adjust the instrument panel lights. Turn the knob all the way up to turn on the interior lamps. Press the knob back into its stored position when you are not using it.
See also:
Using the Directory Command
The directory command lists all of the name tags stored
by the system. To use the directory command:
1. Press and hold for two seconds.
The system
responds with “Ready” followed by a tone. ...
When to Check and Change AutomaticTransmission Fluid
A good time to check your automatic transmission
fluid level is when the engine oil is changed.
Change the fluid and filter at the intervals listed in
Additional Required Services on page 482, and ...
Sum greater than pieces
This LaCrosse just glided through the hills and country roads around Milford
— home to GM's proving grounds — where I test drove it.
There were a few times, if you really stepped on the gas, t ...