Turn Signal/Multifunction Lever

The lever on the left side of the steering column

The lever on the left side of the steering column includes the following:

• Headlamp High/Low-Beam Changer Turn and Lane Change Signals
• Flash-to-Pass FeatureHeadlamp High/Low-Beam Changer
• Flash-to-Pass Feature
•  Windshield Washer Windshield Wipers
•  Cruise Control Windshield Washer
Turn and Lane-Change Signals Cruise Control

    See also:

    Programming Universal HomeRemote — Rolling Code
    Rolling code garage door openers are used for garage doors produced after 1996 and are code protected. Rolling code means the coded signal is changed every time your remote control garage door ope ...

    Setting Cruise Control
    Cruise control will not work if the parking brake is set, or if the master cylinder brake fluid level is low. The cruise control light on the instrument panel cluster comes on after the cruise co ...

    Using the Delete All Name Tags Command
    The delete all name tags command deletes all stored phone book name tags and route name tags for OnStar (if present). To use the delete all name tags command: 1. Press and hold for two seconds. ...