Hazard Warning Flashers
The hazard warning flashers warn others.
They also let police know you have a problem.
Your front and rear turn signal lamps will flash on and off.
The hazard warning flasher button is located on top of the steering column.
The hazard warning flashers work no matter what ignition position the key is in, and even if the key is not in the ignition.
Press the button to make the front and rear turn signal lamps flash on and off. Press the button again to turn the flashers off.
When the hazard warning flashers are on, your turn signals will not work.
See also:
System Settings
Configuring the Number of Favorite Pages
To configure the number of available favorite pages:
1. Press the CONFIG button.
2. Select Radio Settings.
3. Select Radio Favorites.
4. Select the number ...
Removal and Installation of the
Sealant Canister
To remove the sealant canister:
1. Unwrap the sealant hose.
2. Press the canister release
button.
3. Pull up and remove the canister.
4. Replace with a new canister
which is available from you ...
Flash-to-Pass
To flash the high beams, pull the turn signal/lane change lever toward you, and release. ...