Automatic Operation
The system automatically controls the fan speed, air delivery, air conditioning, and recirculation in order to heat or cool the vehicle to the desired temperature.
When the AUTO indicator light is on, the system is in full automatic operation. If the air delivery mode or fan setting is manually adjusted, the auto indicator turns off and displays will show the selected settings.
To place the system in automatic mode do the following:
1. Press AUTO.
2. Set the temperature. Allow the system time to stabilize. Then adjust the temperature as needed for best comfort.
English units can be changed to metric units through the Driver Information Center (DIC). See Vehicle Personalization .
See also:
If You Cannot See the HUD Image When the Ignition Is On
• Is anything covering the
HUD lens?
• Is the HUD dimmer setting bright
enough?
• Is the HUD image adjusted to
the proper height?
• Are you wearing polarized
sunglasses?
• Still ...
Checking Brake Fluid
You can check the brake fluid without taking off
the cap.
Look at the brake fluid
reservoir. The fluid level
should be above
MIN. If it is not, have
your brake system
checked to see if there
...
Brake Fluid
The brake master cylinder and, on manual transmission vehicles, the clutch hydraulic
system use the same reservoir. See Engine Compartment Overview for the location
of the reservoir. The r ...