Headlamp High/Low-Beam Changer
(Headlamp High/Low-Beam Changer):
Push the turn signal/ lane change lever away from you and release, to turn the high
beams on.
To return to low beams, push the lever again or pull it toward you and release.
This indicator light turns on in the instrument panel cluster when the high-beam headlamps are on.
See also:
Gasoline Specifications
At a minimum, gasoline should meet ASTM
specification D 4814 in the United States or
CAN/CGSB-3.5 in Canada. Some gasolines may
contain an octane-enhancing additive called
methylcyclopentadienyl m ...
Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps
A. Back-Up Lamp
B. Turn Signal Lamp
To replace one of these lamps:
1. Open the trunk. See Trunk.
2. Remove the fasteners and pull
back the trunk trim.
3. Remove the four plastic wing
nuts h ...
StabiliTrak® System
The StabiliTrak system assists with directional control of the vehicle in difficult
driving conditions. The system is on when the vehicle is started.
To turn off both Traction Control and Stabil ...