Battery Replacement

Replace the battery if the REPLACE BATTERY IN REMOTE KEY message displays in the DIC. See Key and Lock Messages .

The battery is not rechargeable. To replace the battery:

1. Push the button on the transmitter to extend the key.
2. Remove the battery cover by prying it with a finger.
3. Remove the battery by pushing on the battery and sliding it toward the key blade.
4. Insert the new battery, positive side facing up. Push the battery down until it is held in place. Replace with a CR2032 or equivalent battery.
5. Snap the battery cover back on to the transmitter.

    See also:

    Hazard Warning Flashers
    Hazard Warning Flashers Hazard Warning Flasher: Press this button to make the front and rear turn signal lamps flash on and off. Press again to turn the flashers off. The hazard warning fl ...

    Turn Signals When Towing a Trailer
    The arrows on your instrument panel will flash whenever you signal a turn or lane change. Properly hooked up, the trailer lamps will also flash, telling other drivers you’re about to turn, cha ...

    Bulb Replacement
    For the proper type of replacement bulbs, see Replacement Bulbs . For any bulb-changing procedure not listed in this section, contact your dealer. ...