Initial Drive Information
This section provides a brief overview about some of the important features that may or may not be on your specific vehicle.
For more detailed information, refer to each of the features which can be found later in this owner manual.
See also:
Using the Re-dial Command
1. Press and hold for two
seconds. The system
responds with “Ready” followed by a tone.
2. After the tone, say “Re-dial”. The system responds
with “Re-dial using <phone name> ...
When to Check and Change AutomaticTransmission Fluid
A good time to check your automatic transmission
fluid level is when the engine oil is changed.
Change the fluid and filter at the intervals listed in
Additional Required Services on page 482, and ...
Voice Recognition
The voice recognition system uses commands to control the system and dial phone
numbers.
Noise: The system may not recognize voice commands if there is too much background
noise.
When to Speak: ...
