Protecting Exterior Bright Metal Parts
Regularly clean bright metal parts with water or chrome polish on chrome or stainless steel trim, if necessary.
For aluminum, never use auto or chrome polish, steam, or caustic soap to clean. A coating of wax, rubbed to a high polish, is recommended for all bright metal parts.
See also:
Rear Seat Driver Side Shown, Passenger Side Similar
On vehicles with second row seat-mounted side impact airbags,
they are in the sides of the rear seatback closest to the door.
WARNING
If something is between an occupant and an airbag, the air ...
Tire and Loading Information Label
Label Example
A vehicle-specific Tire and Loading Information label is attached to the vehicle
center pillar (B-pillar). With the driver door open, you will find the label attached
below the do ...
When to Check and Change AutomaticTransmission Fluid
A good time to check your automatic transmission
fluid level is when the engine oil is changed.
Change the fluid and filter at the intervals listed in
Additional Required Services on page 482, and ...
