Ignition Transmission Lock Check
While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position.
• The ignition should turn to LOCK/OFF only when the shift lever is in P (Park).
• With the key access ignition system, the ignition key should come out only in LOCK/OFF.
See Ignition Positions (Key Access) or Ignition Positions (Keyless Access).
Contact your dealer if service is required.
See also:
Electric Parking Brake Light
For vehicles with the Electric
Parking Brake (EPB), the parking
brake status light comes on when
the parking brake is applied. If the
light continues flashing after the
parking brake is re ...
Starting the Vehicle
1. Aim the RKE transmitter at the vehicle. 2. Press and release
. 3. Immediately after completing Step
2, press and hold until the turn signal
lamps flash, or for about two seconds if the vehicl ...
Leaving After Parking on a Hill
1. Apply and hold the brake pedal while you:
• start the engine,
• shift into a gear, and
• release the parking brake.
2. Let up on the brake pedal.
3. Drive slowly until the trailer is cle ...
