Checking Coolant
The vehicle must be on a level surface when checking the coolant level.
Check to see if coolant is visible in the coolant surge tank. If the coolant inside the coolant surge tank is boiling, do not do anything else until it cools down.
If coolant is visible but the coolant level is not at or above the mark pointed to, add a 50/50 mixture of deionized water or clean drinkable water and DEX-COOL coolant.
Be sure the cooling system is cool before this is done.
If no coolant is visible in the coolant surge tank, add coolant as follows:
See also:
Extending Engine Run Time
For a 10-minute extension, repeat Steps 1–3 while the engine is still running.
The remote start can be extended once.
When the remote start is extended, the second 10 minutes will start immediate ...
Using UHP with Infotainment Controls
Pairing a Phone
If your mobile phone has simple
pairing or auto discovery features,
they need to be turned off before
the mobile phone can be paired to
the UHP system. Reference the
mobile ...
Using the Store Command
The store command allows a phone number to be
stored without entering the digits individually.
1. Press and hold for two seconds.
The system
responds with “Ready” followed by a tone.
2. S ...