Playing a CD
A disc must be loaded to select the source.
When a disc is loaded, the disc icon displays.
There are two ways to play a CD:
• Insert the disc and playback starts automatically.
• Press CD/AUX, MEM/DVD/AUX, or SOURCE repeatedly to select the disc source.
See also:
Driving Characteristics and Towing Tips
WARNING
The driver can lose control when pulling a trailer if the correct equipment is
not used or the vehicle is not driven properly. For example, if the trailer is too
heavy, the brakes may n ...
EPB Release
To release the EPB, place the ignition in the ON/RUN position, apply and hold
the brake pedal, and push down momentarily on the EPB switch. If you attempt to
release the EPB without the brake peda ...
Headlamps, Front Turn Signal, andParking Lamps
To replace a bulb, do the following:
1. Open the hood.
2. Remove the grille by grasping and pulling it
forward.
3. Lift the two headlamp retaining clips.
4. Pull the headlamp assembly away from ...
