Storing Radio Station Presets
There are a few ways to store presets.
Up to 36 preset stations can be stored. AM, FM, and XM, if equipped, can be mixed.
1. From the AM, FM, or XM main page, press and hold one of the preset screen buttons located at the bottom of the screen. After a few seconds, a beep will be heard and the new preset information will display on that screen button.
2. Touch and hold a preset button to store the currently active station. After a few seconds, a beep will be heard and the new preset information will display on a small pop-up display at the bottom of the screen.
3. Repeat the steps for each preset.
To change the number of preset pages, see “Mixed-Band Presets” following for more information.
Recalling a Preset Station
To recall a preset station from a FAV page, do the following:
• Press the FAV button on the faceplate to display the FAV pop-up. Select the desired preset from the pop-up.
• Press the FAV screen button at the top bar to display the preset pop-up that appears at the bottom of the page. Press one of the preset screen buttons to go to the selected preset station.
• In the AM, FM, or XM (if equipped) main page, press one of the preset screen buttons to go to the selected preset station.
See also:
Passenger Compartment Air Filter
The filter removes dust, pollen, and other airborne irritants from outside air that is pulled into the vehicle.
The filter should be replaced as part of routine scheduled maintenance.
See Scheduled ...
Erasing Universal Home Remote
Buttons
The programmed buttons should be erased when the
vehicle is sold or the lease ends.
To erase either Rolling Code or Fixed Code on the
Universal Home Remote device:
1. Press and hold the two outs ...
Checking Engine Oil
It is a good idea to check the engine oil level at each fuel fill. In order to get an accurate reading, the oil must be warm and the vehicle must be on level ground. The engine oil dipstick handle is ...