Audio Settings

The audio settings can be set for each radio band and each audio player source.

To quickly reset an audio setting value to 0:

1. Press the TONE button.

2. Select the audio setting.

3. Press and hold the SELECT button until the value changes to 0.

Press the back to the Tone Settings menu. BACK button to go back to the Tone Settings menu.

    See also:

    Battery Run-Down Protection
    This feature shuts off the dome, courtesy, and vanity lamps if they are left on for more than 20 minutes when the ignition is off. This will keep the battery from running down. If the battery ru ...

    Safety
    Since our previous review, the LaCrosse has been crash-tested by the Insurance Institute for Highway Safety, and it performed very well. It's a Top Safety Pick because it scored Good, the top rati ...

    How the System Works
    URPA comes on automatically when the shift lever is moved into R (Reverse). A single tone sounds to indicate the system is working. URPA operates only at speeds less than 8 km/h (5 mph). An ...