Replacing Safety Belt System Parts after a Crash
WARNING!
A crash can damage the safety
belt system in the vehicle.
A damaged safety belt system
may not properly protect the
person using it, resulting in
serious injury or even death in a
crash. To help make sure the
safety belt systems are working
properly after a crash, have them
inspected and any necessary
replacements made as soon as
possible.
After a minor crash, replacement of safety belts may not be necessary.
But the safety belt assemblies that were used during any crash may have been stressed or damaged.
See your dealer to have the safety belt assemblies inspected or replaced.
New parts and repairs may be necessary even if the safety belt system was not being used at the time of the crash.
Have the safety belt pretensioners checked if the vehicle has been in a crash, or if the airbag readiness light stays on after you start the vehicle or while you are driving. See Airbag Readiness Light.
See also:
Recommended Fuel
If the vehicle has a 2.4L L4 engine (VIN Code C), use regular unleaded gasoline with a posted octane rating of 87 or higher. If the octane rating is less than 87, an audible knocking noise, commonly r ...
Automatic EPB Release
The EPB will automatically release if the vehicle is running, placed into gear,
and an attempt is made to drive away. Avoid rapid acceleration when the EPB is applied,
to preserve parking brake li ...
Clearing the System
Unless information is deleted out of the in-vehicle Bluetooth system, it will
be retained indefinitely. This includes all saved name tags in the phone book and
phone pairing information. For infor ...