Conditions in Which Remote Start Will Not Work
The remote start will not operate if:
• The key is in the ignition (key access) or the ignition is in any position other than OFF (keyless access).
• The transmitter is in the vehicle (keyless access).
• The hood is not closed.
• The hazard warning flashers are on.
• There is an emission control system malfunction.
• The engine coolant temperature is too high.
• The oil pressure is low.
• Two remote vehicle starts have already been used.
• The vehicle is not in P (Park).
See also:
Starting the Vehicle
1. Aim the RKE transmitter at the vehicle. 2. Press and release
. 3. Immediately after completing Step
2, press and hold until the turn signal
lamps flash, or for about two seconds if the vehicl ...
When It Is Time for New Tires
Factors such as maintenance,
temperatures, driving speeds,
vehicle loading, and road conditions
affect the wear rate of the tires.
Treadwear indicators are one way to
tell when it is time f ...
Weatherstrips
Apply silicone grease on weatherstrips to make them last longer, seal better,
and not stick or squeak. See Recommended Fluids and Lubricants . ...