Starting the Vehicle with a Low Transmitter Battery

If the transmitter battery is weak, the DIC may display NO REMOTE DETECTED when you try to start the vehicle. The REPLACE BATTERY IN REMOTE KEY message may also be displayed at this time.

To start the vehicle:

To start the vehicle:

1. Remove the cupholder from the center console storage area.

2. Place the transmitter in the transmitter pocket with the buttons facing up.

3. With the vehicle in P (Park) or N (Neutral), press the brake pedal and the START/STOP button. See Starting the Engine for additional information about the vehicle's keyless ignition with pushbutton start.

Replace the transmitter battery as soon as possible.

    See also:

    Wheel Alignment
    Wheel alignment is critical for ensuring that the tires deliver optimal wear and performance. • Signs that the alignment may need to be adjusted include pulling, improper vehicle handling ...

    Lumbar Adjustment
    Lumbar Adjustment To adjust the lumbar support, if available: • Press and hold the front or rear of the control to increase or decrease lumbar support. • Press and hold the top or botto ...

    Recommended Fuel
    Use regular unleaded gasoline with a posted octane rating of 87 or higher. If the octane rating is less than 87, an audible knocking noise, commonly referred to as spark knock, might be heard when ...