Service
Never try to do your own service on eAssist components. You can be injured and the vehicle can be damaged if you try to do your own service work. Service and repair of these high voltage components should only be performed by a trained service technician with the proper knowledge and tools. See Doing Your Own Service Work.
See also:
Canceling a Remote Start
To cancel a remote start:
• Aim the RKE transmitter at the vehicle and press
and hold until the parking lamps
turn off.
• Turn on the hazard warning flashers.
• Turn the ignition switch ...
SBZA Detection Zones
The SBZA sensor covers a zone of
approximately one lane over from
both sides of the vehicle,
or 3.5m(11 ft). This zone starts at
each side mirror and goes back
approximately 5.0 m(16 ft). Th ...
Compass
There is a compass display in the Driver Information Center (DIC). The compass
receives its heading and other information from the Global Positioning System (GPS)
antenna, StabiliTrak, and vehicle ...