Tire Pressure for High-Speed Operation
WARNING
Driving at high speeds, 160 km/h (100 mph) or higher, puts an additional strain on tires.
Sustained high-speed driving causes excessive heat buildup and can cause sudden tire failure.
You could have a crash and you or others could be killed. Some high-speed rated tires require inflation pressure adjustment for high-speed operation. When speed limits and road conditions are such that a vehicle can be driven at high speeds, make sure the tires are rated for high-speed operation, in excellent condition, and set to the correct cold tire inflation pressure for the vehicle load.
Vehicles with P235/50R18 size tires require inflation pressure adjustment when driving the vehicle at speeds of 160 km/h (100 mph) or higher.
Set the cold inflation pressure to 270 kPa (39 psi).
Vehicles with P245/40R19 size tires require inflation pressure adjustment when driving the vehicle at speeds of 160 km/h (100 mph) or higher.
Set the cold inflation pressure to 310 kPa (45 psi).
Return the tires to the recommended cold tire inflation pressure when high-speed driving has ended. See Vehicle Load Limits and Tire Pressure .
See also:
Battery
The battery supplies power to start
the engine and operate any
additional electrical accessories.
• To avoid break-down or failure to
start the vehicle, maintain a
battery with full crankin ...
Brake Pedal Travel
See your dealer/retailer if the brake pedal does not
return to normal height, or if there is a rapid increase in
pedal travel. This could be a sign that brake service
might be required. ...
Unable to Connect to OnStar
Message
If there is limited cellular coverage
or the cellular network has reached
maximum capacity, this message
may come on. Push to try the
call again or try again after driving a
few miles into ...