Shifting out of Park (Automatic Transmission)
This vehicle is equipped with an electronic shift lock release system. The shift lock release is designed to:
► Prevent ignition key removal unless the shift lever is in P (Park) with the shift lever button fully released. ► Prevent movement of the shift lever out of P (Park) unless the ignition is in ON/RUN and the brake pedal is applied.The shift lock release is always functional except in the case of an uncharged or low voltage (less than 9 volt) battery.
If the vehicle has an uncharged battery or a battery with low voltage, try charging or jump starting the battery. See Jump Starting
To shift out of P (Park):
1. Apply the brake pedal.
2. Turn the ignition to ON/RUN.
3. Press the shift lever button.
4. Move the shift lever to the desired position.
If still unable to shift out of P (Park):
1. Fully release the shift lever button.
2. Hold the brake pedal down and press the shift lever button again.
3. Move the shift lever to the desired position.
If you still cannot move the shift lever from P (Park), consult your dealer or a professional towing service.
See also:
Unit
Move to switch between
metric or US when the Unit display
is active. Press SET/CLR to confirm
the setting. This will change the
displays on the cluster and DIC to
either metric or English ( ...
Power Door Locks
The power door lock
switches are located on
the driver’s and front
passenger’s door
armrests.
Press the lock symbol to lock all of the doors.
To unlock the doors, press the other side of ...
Volume Control
VOL/ (Volume/Power): Turn to
adjust the volume.
(Phone/Mute): For vehicles with
OnStar®, press and hold to mute
the infotainment system. Press and
hold again, or turn the VOL/
knob t ...
