Using the Call Command

1. Press ► For vehicles without a navigation system, the system responds “Ready,” followed by a tone..

► For vehicles without a navigation system, the system responds “Ready,” followed by a tone.

► For vehicles with a navigation system, the system responds with a tone. After the tone, say “Hands Free.” The system responds “Ready,” followed by a tone.

2. Say “Call.” The system responds “Call using <phone name>.

Please say the name tag,” followed by a tone.

3. Say the name tag of the person to call.

► If the system recognizes the name tag, it responds “OK, calling <name tag>” and dials the number.

► If the system does not recognize the name tag, it confirms the name tag followed by a tone. If the name tag is correct, say “Yes.” The system responds with “OK, calling <name tag>” and dials the number.

If the name tag is not correct, say “No.” The system will ask for the name tag again.

Once connected, the person called will be heard through the audio speakers.

    See also:

    Trunk Release
    To open the trunk, press on the Remote Keyless Entry (RKE) transmitter or press the touchpad under the vehicle emblem. See Trunk  for additional information. ...

    License Plate Lamp
    To replace one of these bulbs: Passenger Side Shown, Driver Side Similar 1. Push the release tab (A) toward the lamp assembly. 2. Pull the lamp assembly down to remove. A. Bulb Socket B. B ...

    Locking Feedback
    This allows selection of what type of feedback is given when locking the vehicle with the RKE transmitter. Press SELECT when Locking Feedback is highlighted. Turn the Menu knob to select Ligh ...