How to Reset the Engine Oil LifeSystem
The Engine Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a CHANGE ENGINE OIL message being turned on, reset the system.
To reset the Engine Oil Life System, do the following:
1. Turn the ignition key to RUN with the
engine off.
2. Fully press and release the accelerator pedal
slowly three times within five seconds.
3. Turn the key to LOCK.
If the message comes back on when you start the vehicle, the engine oil life system has not reset.
Repeat the procedure.
See also:
Vehicle Data Recording and Privacy
This GM vehicle has a number of sophisticated computers that record information
about the vehicle’s performance and how it is driven. For example, the vehicle uses
computer modules to monitor an ...
Initial Drive Information
This section provides a brief overview about some of the important features that may or may not be on your specific vehicle.
For more detailed information, refer to each of the features which can be ...
Backglass Antenna
The AM-FM antenna is integrated with the rear window
defogger, located in the rear window. Make sure that the
inside surface of the rear window is not scratched and
that the lines on the glass a ...