Removing the Spare Tire and Tools
To access the spare tire and tools:
1. Open the trunk. See Trunk .
2. Lift the load floor.
A. Retainer Nut
B. Tool Bag Tether
C. Tool Bag
D. Spare Tire
3. Turn the retainer nut (A) counterclockwise to remove it. Then remove the tool bag tether (B) from the stow rod, the tool bag (C) containing the wheel wrench and wheel blocks, and the spare tire (D).
4. Remove the jack, jack handle extension, and two-piece wrench, if equipped.
A. Hex Head Jack
B. Jack Handle Extension
C. Coin/Pierce Jack
D. Two-Piece Wrench
This vehicle may have one of the following: A coin/pierce jack (C), a jack handle extension (B), and a two-piece wrench (D), or a hex head jack (A) and two-piece wrench (D).
See also:
Remote Vehicle Start
The vehicle may have this feature that allows you to start the engine from outside
the vehicle.
(Remote Vehicle Start): This button
will be on the RKE transmitter if the vehicle has remote start ...
Cruise Control
The cruise control buttons
are located on the left side
of the steering wheel.
: On/Off.
+ RES: Press to accelerate or resume speed.
SET–: Press to set or decrease the speed.
(Cancel): P ...
Initial Drive Information
This section provides a brief overview about some of the important features that
may or may not be on your specific vehicle.
For more detailed information, refer to each of the features which can b ...