Fog Lamps

To replace the front fog lamp bulb:

1. Locate the fog lamp located under the front fascia.

2. Disconnect the electrical connector from the fog lamp bulb assembly.

3. Remove the bulb by turning it counterclockwise and pulling it straight out of the assembly.

4. Install the new bulb by turning it clockwise into the assembly.

5. Reverse Steps 1 through 3 to reinstall.

    See also:

    How the System Works
    URPA comes on automatically when the shift lever is moved into R (Reverse). The rear display briefly illuminates to indicate the system is working. URPA operates only at speeds less than 8 km/h ...

    English and Metric Unit Conversion
    To change the display units between English and metric units, see Driver Information Center (DIC) . ...

    Hill Start Assist (HSA)
    Some vehicles have a Hill Start Assist (HSA) feature, which may be useful when the vehicle is stopped on a grade. This feature is designed to prevent the vehicle from rolling, either forward or re ...