Vehicle Information Menu Items

Press MENU on the turn signal lever until the Vehicle Information Menu is displayed. Use w / x to scroll through the following menu items:

  • Unit
  • Tire Pressure
  • Remaining Oil Life
  • Battery Voltage

Unit

Move US when the Unit display is active. Press SET/CLR to confirm the setting. This will to switch between metric or US when the Unit display is active. Press SET/CLR to confirm the setting. This will change the displays on the cluster and DIC to either metric or English (US) measurements.

Tire Pressure

The display will show a vehicle with the approximate pressures of all four tires. Tire pressure is displayed in either kilopascal (kPa) or pounds per square inch (psi). See Tire Pressure Monitor System  and Tire Pressure Monitor Operation  for more information.

Remaining Oil Life

This display shows an estimate of the oil's remaining useful life. If REMAINING OIL LIFE 99% is displayed, that means 99% of the current oil life remains.

When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display.

See Engine Oil Messages . The oil should be changed as soon as possible. See Engine Oil . In addition to the Engine Oil Life System monitoring the oil life, additional maintenance is recommended in the Maintenance Schedule in this manual. See Maintenance Schedule  for more information.

Remember, the Remaining Oil Life display must be reset after each oil change. It will not reset itself. Also, be careful not to reset the Remaining Oil Life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset the Engine Oil Life System, press SET/ CLR while the Remaining Oil Life display is active. See Engine Oil Life System .

Battery Voltage

This display shows the current battery voltage. If the voltage is in the normal range, the value will display. For example, the display may read Battery Voltage 15.0 Volts. The vehicle's charging system regulates voltage based on the state of the battery. The battery voltage can fluctuate while viewing this information on the DIC. This is normal. See Charging System Light  for more information. If there is a problem with the battery charging system, the DIC will display a message

    See also:

    Add-on Electrical Equipment
    The OnStar system is integrated into the electrical architecture of the vehicle. Do not add any electrical equipment. See Add-On Electrical Equipment. Added electrical equipment may interfer ...

    Cruise Control
    : Press to turn the cruise control system on and off. An indicator light will turn on or off in the instrument cluster. : Press to disengage cruise control without erasing the set speed from ...

    Setting the Clock (Radio with CD)
    The clock menu can be only be used with the radio on while in ON/RUN or ACC/ACCESSORY. To set the time: 1. Press the CONFIG button and select Time Settings or press H. 2. Select Set Time. 3. Tu ...