Starting the Vehicle

1. Aim the RKE transmitter at the vehicle. 2. Press and release 2, press and hold until the turn signal. 3. Immediately after completing Step 2, press and hold lamps flash, or for about two seconds if the vehicle is not in view. until the turn signal lamps flash, or for about two seconds if the vehicle is not in view.

When the engine starts, the parking lamps will turn on and remain on as long as the engine is running. The doors will be locked and the climate control system may come on.

The engine will continue to run for 10 minutes. Repeat the steps for a 10-minute time extension. Remote start can be extended only once.

    See also:

    Tire Designations
    Tire Size The following is an example of a typical passenger vehicle tire size. (A) Passenger (P-Metric) Tire: The United States version of a metric tire sizing system. The letter P as the first ...

    Door Locks
    To lock or unlock the door, use the Remote Keyless Entry (RKE) transmitter or the key from outside the vehicle, and the door lock knob or switch from inside the vehicle. To unlock or lock the fuel do ...

    Overheated Engine Protection Operating Mode
    This emergency operating mode allows the vehicle to be driven to a safe place in an emergency situation. If an overheated engine condition exists, an overheat protection mode which alternate ...