Uplevel Headlamp Assembly

The uplevel model vehicle has a high intensity discharge (HID) high/low beam, a dedicated DRL, and a parking/turn signal lamp on the headlamp assembly. See High Intensity Discharge (HID) Lighting for more information.

To replace one of these bulbs:

1. Open the hood. See Hood.

A. DRL Lamp

A. DRL Lamp
B. Parking/Turn Signal Lamp

2. Turn the bulb socket counterclockwise to remove it from the headlamp assembly.

3. Pull the bulb straight out from the socket.

4. Push the new bulb into the socket and reinstall the socket into the headlamp assembly by turning it clockwise.

    See also:

    Bulb Replacement
    For the proper type of replacement bulbs, see Replacement Bulbs . For any bulb-changing procedure not listed in this section, contact your dealer. ...

    Steering Wheel Adjustment
    To adjust the steering wheel: 1. Pull the lever (A) down. 2. Move the steering wheel up or down. 3. Pull or push the steering wheel closer or away from you. 4. Lift the lever (A) up to lock t ...

    Storing a Flat or Spare Tire and Tools
    WARNING Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all th ...