Washer Fluid
What to Use
When windshield washer fluid is needed, be sure to read the manufacturer's instructions before use. If operating the vehicle in an area where the temperature may fall below freezing, use a fluid that has sufficient protection against freezing.
Adding Washer Fluid
Open the cap with the washer symbol on it. Add washer fluid until the tank is full. See Engine Compartment Overview for reservoir location.
Notice. When using concentrated
washer fluid, follow the
manufacturer's instructions
for adding water.
• Do not mix water with
ready-to-use washer fluid.
Water can cause the solution
to freeze and damage the
washer fluid tank and other
parts of the washer system.
Also, water does not clean as
well as washer fluid.
• Fill the washer fluid tank only
three-quarters full when it is
very cold. This allows for
fluid expansion if freezing
occurs, which could damage
the tank if it is
completely full.
• Do not use engine coolant
(antifreeze) in the windshield
washer. It can damage the
windshield washer system
and paint.
See also:
Low-Profile Tires
If the vehicle has P235/45R18 size tires, they are classified as low-profile
tires.
Notice: Low-profile tires are more susceptible to damage from road hazards or
curb impact than standard profile ...
Audio System
When using the in-vehicle Bluetooth system, sound
comes through the vehicle’s front audio system speakers
and overrides the audio system. Use the audio system
volume knob, during a call, to ch ...
All-Wheel Drive
When to Check Lubricant
It is not necessary to regularly check fluid unless
you suspect there is a leak or you hear an
unusual noise. A fluid loss could indicate a
problem. Have it inspected and r ...