3.6L V6 Engine
If the temperature overheat gauge is no longer in the overheat zone or an engine coolant temperature warning light no longer displays, the vehicle can be driven. Continue to drive the vehicle slowly for about 10 minutes.
Keep a safe vehicle distance from the vehicle in front. If the warning does not come back on, continue to drive normally.
If the warning continues, pull over, stop, and park the vehicle right away.
If there is no sign of steam, idle the engine for three minutes while parked. If the warning is still displayed, turn off the engine until it cools down. Also, see Overheated Engine Protection Operating Mode.
See also:
Additives
To provide cleaner air, all gasolines in the
United States are now required to contain additives
that will help prevent engine and fuel system
deposits from forming, allowing your emission
control ...
Remote Trunk Release
The remote trunk release button
is located on the
instrument panel. See Instrument Panel.
Press the button to open the trunk. To use this feature,
your vehicle must be in P (Park) or N (Neut ...
Modest Power, at Best
The 2.4-liter four-cylinder generates 182 horsepower, versus the 3.0-liter's
255 hp (252 hp with all-wheel drive) and the 3.6-liter's 280 hp. The CX comes
only with front-wheel drive and either th ...
