3.6L V6 Engine
3.6L V6 Engine
1. Remove the screws on top of the engine air cleaner/filter housing.
2. Lift the filter cover housing away from the engine.
3. Pull out the filter.
4. Inspect or replace the engine air cleaner/filter.
5. Lower the filter cover housing toward the engine.
6. Install the screws on the top of the housing to lock the cover in place.
WARNING!
Operating the engine with the air
cleaner/filter off can cause you or
others to be burned. The air
cleaner not only cleans the air; it
helps to stop flames if the engine
backfires. Use caution when
working on the engine and do not
drive with the air cleaner/filter off.
Notice:
If the air cleaner/filter is
off, dirt can easily get into the
engine, which could damage it.
Always have the air cleaner/filter
in place when you are driving.
See also:
Driving on Wet Roads
Rain and wet roads can reduce vehicle traction and affect your ability to stop
and accelerate. Always drive slower in these types of driving conditions and avoid
driving through large puddles and ...
Fog Lamps
To turn on the fog lamps, the ignition and the headlamps or parking lamps must be on.
If the fog lamps are turned on while the exterior lamp switch is in the AUTO position, the headlamps come on ...
Background
Given the fact that the vast majority of SUVs were rarely taken off-pavement
by their owners, much less driven under serious off-road conditions, a new type
of car-based "crossover SUV" ...