When the System Does Not Seem to Work Properly
The RVC system may not work properly or display a clear image if:
• The RVC is turned off. See “Turning the Rear Camera System On or Off” earlier in this section.
• It is dark.
• The sun or the beam of headlamps are shining directly into the camera lens.
• Ice, snow, mud, or anything else builds up on the camera lens.
Clean the lens, rinse it with water, and wipe it with a soft cloth.
• The back of the vehicle is in an accident. The position and mounting angle of the camera can change or the camera can be affected. Be sure to have the camera and its position and mounting angle checked at your dealer.
See also:
Using the Digit Dial Command
1. Press
.
► For vehicles without a navigation system, the system responds “Ready,” followed by a tone.
► For vehicles with a navigation system, the system responds with a tone. Aft ...
Setting Cruise Control
If the cruise button is on when not in
use, it could get bumped and go into
cruise when not desired. Keep the
cruise control switch off when cruise
is not being used.
1. Press to turn the cr ...
Responsive performance
Buick LaCrosse's stiff body structure serves as the foundation for precise
suspension tuning, safety and a quiet ride. Buyers can choose from a family of
efficient, direct-injection six-cylinder e ...