SBZA Detection Zones
The SBZA sensor covers a zone of approximately one lane over from both sides of the vehicle, or 3.5m(11 ft). This zone starts at each side mirror and goes back approximately 5.0 m(16 ft). The height of the zone is approximately between 0.5 m(1.5 ft) and 2.0m(6 ft) off the ground.
The SBZA detection zones do not change if the vehicle is towing a trailer. So be extra careful when changing lanes while towing a trailer.
See also:
How to Detect a Tamper Condition
If is pressed and the
horn
sounds, an attempted break-in
occurred while the system was
armed.
If the alarm has been activated, a
message will appear on the DIC.
See Anti-theft Alarm ...
Before Leaving on a Long Trip
Make sure you are ready. Try to be well rested.
If you must start when you are not fresh — such as
after a day’s work — do not plan to make too
many miles that first part of the journey. We ...
What Makes an Airbag Inflate?
In a deployment event, the sensing system sends an electrical signal triggering
a release of gas from the inflator. Gas from the inflator fills the airbag causing
the bag to break out of the cover ...
