StabiliTrak® System

The vehicle may have a vehicle stability enhancement system called StabiliTrak. It is an advanced computer-controlled system that assists with directional control of the vehicle in difficult driving conditions.

StabiliTrak activates when the computer senses a difference between the intended path and the direction the vehicle is actually traveling. StabiliTrak selectively applies braking pressure to the vehicle brakes to help steer the vehicle in the intended direction.

StabiliTrak comes on automatically whenever the vehicle is started. To assist with directional control of the vehicle, the system should always be left on.

When StabiliTrak activates, flashes on the instrument panel. flashes on the instrument panel.

A noise may be heard or vibration may be felt in the brake pedal. This is normal. Continue to steer the vehicle in the intended direction.

See Traction Control System (TCS)/StabiliTrak® Light for more information.

If a problem is detected with StabiliTrak, SERVICE STABILITRAK is displayed on the Driver Information Center (DIC).

See Ride Control System Messages. When this message is displayed and stays on, the vehicle is safe to drive comes on and stays on, the vehicle is safe to drive but the system is not operational.

Driving should be adjusted accordingly.

If the system. comes on and stays on, reset the system.

To reset:

1. Stop the vehicle.

2. Turn the engine off and wait 15 seconds.

3. Start the engine.

If vehicle needs service. still comes on and stays on, the vehicle needs service.

• To turn off both StabiliTrak and

• To turn off both StabiliTrak and TCS, press and hold the TCS/StabiliTrak button, located on the instrument panel, until and illuminate and the appropriate illuminate and the appropriate DIC message is displayed. See Ride Control System Messages.

When StabiliTrak is turned off, the system will not assist with directional control of the vehicle or limit wheel spin. Driving should be adjusted accordingly.

See Traction Control System (TCS)/StabiliTrak® Light for more information.

• Press and release the TCS/StabiliTrak button again to turn the system back on.

If cruise control is being used when StabiliTrak activates, cruise control will automatically disengage. Press the cruise control button to reengage when road conditions allow. See Cruise Control for more information.

    See also:

    Disarming the System
    To disarm the system, do one of the following: • Press on the RKE transmitter. • Approach the vehicle with the RKE transmitter (keyless access). • Start the engine. The alarm automati ...

    Interior
    In standard form, the Rendezvous seats five occupants, but its reconfigurable interior can be equipped with third-row seats that hold two additional people. The second row can have either a three- ...

    Park Tilt Mirrors
    If the vehicle is equipped with memory mirrors, there is an option to have the mirrors tilt down, when in R (Reverse), to more easily see the ground near the vehicle. When the vehicle is shif ...