Driving on Snow or Ice
Drive carefully when there is snow or ice between the tires and the road, creating less traction or grip.
Wet ice can occur at about 0°C (32°F) when freezing rain begins to fall, resulting in even less traction.
Avoid driving on wet ice or in freezing rain until roads can be treated with salt or sand.
Drive with caution, whatever the condition. Accelerate gently so traction is not lost. Accelerating too quickly causes the wheels to spin and makes the surface under the tires slick, so there is even less traction.
Try not to break the fragile traction.
If you accelerate too fast, the drive wheels will spin and polish the surface under the tires even more.
The Antilock Brake System (ABS) improves vehicle stability during hard stops on slippery roads, but apply the brakes sooner than when on dry pavement.
Allow greater following distance on any slippery road and watch for slippery spots. Icy patches can occur on otherwise clear roads in shaded areas. The surface of a curve or an overpass can remain icy when the surrounding roads are clear. Avoid sudden steering maneuvers and braking while on ice.
Turn off cruise control on slippery surfaces.
See also:
3.5mm Jack
Connect a 3.5mm (1/8 in) cable to the auxiliary input jack to use a portable
audio player.
Playback of an audio device that is connected to the 3.5mm jack can only be controlled
using the control ...
Tire Sidewall Labeling
Useful information about a tire is molded into its
sidewall. The examples below show a typical
passenger vehicle tire and a compact spare tire
sidewall.
Passenger (P-Metric) Tire Example
(A) ...
Radio Messages
CAL ERR (Calibration Error): The audio system
has been calibrated for your vehicle from the
factory. If CAL ERR displays, it means that the
radio has not been configured properly for
the vehicle a ...