Display Settings
Press the Config button on the Home Page or the CONFIG button on the faceplate, then select Display Settings from the list.
The following options may display:
Dimming Mode: Press to change the screen background. The Automatic setting adjusts the screen background automatically depending on the exterior lighting conditions.
To change the overall brightness setting for the display, use the vehicle interior lighting instrument panel illumination control.
See also:
Parking Brake and Automatic
Transmission P (Park) Mechanism
Check
WARNING:
When you are doing this check, the vehicle could
begin to move. You or others could be injured and
property could be damaged. Make sure there is
room in front of the vehicle in case it ...
RDS Messages
ALERT!: Alert warns of local or national
emergencies. When an alert announcement
comes on the current radio station, ALERT!
displays. You will hear the announcement, even if
the volume is low or a ...
SBZA Detection Zones
The SBZA sensor covers a zone of
approximately one lane over from
both sides of the vehicle,
or 3.5m(11 ft). This zone starts at
each side mirror and goes back
approximately 5.0 m(16 ft). Th ...