Locking Feedback

This allows selection of what type of feedback is given when locking the vehicle with the RKE transmitter.

Press SELECT when Locking Feedback is highlighted. Turn the Menu knob to select Lights and Horn, Lights Only, Horn Only, or Off.

Press SELECT to confirm the selection. Press the last menu. BACK to move to the last menu.

    See also:

    Programming without a Recognized Transmitter (Keyless Access Vehicles Only)
    If there are no currently recognized transmitters available, follow this procedure to program up to five transmitters. This feature is not available in Canada. This procedure will take approximate ...

    Lower Anchor and Top Tether Anchor Locations
    Rear Seat (Top Tether Anchor): Seating positions with top tether anchors. (Lower Anchor): Seating positions with two lower anchors. To assist you in locating the lower anchors, each ...

    High Voltage Safety Information
    eAssist vehicles have a standard 12-volt battery and a high voltage battery. Only a trained service technician with the proper knowledge and tools should inspect, test, or replace the high v ...