Trip 1 and Trip 2
This display shows the current distance traveled, in either kilometers (km) or miles (mi), since the last reset for the trip odometer.
The trip odometer can be reset to zero by pressing SET/CLR while the trip odometer display is showing.
See also:
Tire and Loading Information Label
Label Example
A vehicle-specific Tire and Loading Information label is attached to the vehicle
center pillar (B-pillar). With the driver door open, you will find the label attached
below the do ...
Voice Pass-Thru
Voice pass-thru allows access to the voice recognition commands on the cell phone. See the cell phone manufacturer's user guide to see if the cell phone supports this feature.
To access contacts stor ...
Total Weight on Your Vehicle’s Tires
Be sure your vehicle’s tires are inflated to the
upper limit for cold tires. You’ll find these numbers
on the Certification label at the rear edge of the
driver’s door or see Loading Your Veh ...
