Driver Safety Belt Reminder Light
There is a driver safety belt reminder light on the instrument panel cluster.

When the vehicle is started, this light flashes and a chime may come on to remind the driver to fasten their safety belt. Then the light stays on solid until the belt is buckled.
This cycle may continue several times if the driver remains or becomes unbuckled while the vehicle is moving.
If the driver safety belt is buckled, neither the light nor the chime comes on.
See also:
Total Weight on Your Vehicle’s Tires
Be sure your vehicle’s tires are inflated to the
upper limit for cold tires. You’ll find these numbers
on the Certification label at the rear edge of the
driver’s door or see Loading Your Veh ...
Windshield Washer
Pull the windshield wiper lever toward you to spray windshield washer fluid and
activate the wipers.
The washer and wipers will continue until the lever is released or the maximum
wash time is re ...
Flash-to-Pass
To flash the high beams, pull the
turn signal/lane change lever toward
you, and release. ...
