Remote Start Heated and Ventilated Seats

During a remote start, the heated or ventilated seats, if equipped, can be turned on automatically. They are canceled when the ignition is turned on. Press the button to use the heated or ventilated seats after the vehicle is started.

The heated or ventilated seat indicator lights on the button do not turn on during a remote start.

The heated seat temperature performance of an unoccupied seat may be reduced. This is normal.

The heated or ventilated seats will not turn on during a remote start unless they are enabled in the vehicle personalization menu. See Remote Vehicle Start and Vehicle Personalization for more information.

    See also:

    Securing a Child Restraint in a Rear Outside Seat Position
    If your child restraint has the LATCH system, see Lower Anchors and Tethers for Children (LATCH) on page 54. If your child restraint does not have the LATCH system, you will be using the lap-sho ...

    Removing the Flat Tire and Installing the Spare Tire
    Take off the wheel cover or center cap, if the vehicle has one, to reach the wheel bolts. 1. Do a safety check before proceeding. See If a Tire Goes Flat  for more information. 2. Turn the wh ...

    Erasing Universal Home RemoteButtons
    You should erase the programmed buttons when you sell the vehicle or terminate your lease. To erase either rolling code or fixed code on the Universal Home Remote device, do the following: 1. ...