Canceling a Remote Start
To cancel a remote start, do any of the following:
• Aim the RKE transmitter at the
vehicle and press and hold 
until the parking lamps turn off.
• Turn on the hazard warning flashers.
• Turn the vehicle on and then off.
See also:
Tire and Loading Information Label
A vehicle specific Tire and Loading Information
label is attached to the center pillar (B-pillar).
With the driver’s door open, you will find the label
attached below the door lock post (st ...
DVD Player
The DVD player is located in the overhead
console. The DVD player can be controlled by the
buttons on the DVD player and/or by the buttons
on the remote control. See “Remote Control” later
in ...
TPMS Malfunction Light and Message
The TPMS will not function properly if one or more of the
TPMS sensors are missing or inoperable. When the
system detects a malfunction, the low tire warning light
flashes for about one minute a ...