StabiliTrak® System
The StabliTrak system assists with directional control of the vehicle in difficult driving conditions. The system turns on automatically every time the vehicle is started.
• To turn off both TCS and
StabiliTrak, press and hold the
TCS/StabiliTrak button, located
on the console to the right of the
shift lever, until 
and
illuminate and the appropriate
DIC message is displayed. See
Ride Control System Messages.
• Press and release the TCS/StabiliTrak button to turn on both systems.
For more information, see StabiliTrak® System.
See also:
Outside Air Temperature Display
A new outside temperature reading will be
displayed if the vehicle has been off for more than
three hours. If the vehicle has been off for less
than three hours, the old temperature reading may
be ...
What to Add
Use only new DOT 3 brake fluid from a sealed container.
See Recommended Fluids and Lubricants.
Always clean the brake fluid reservoir cap and the
area around the cap before removing it. This helps ...
Glove Box
Lift up on the lever to open it.
The glovebox features a pen holder (A).
The intermediate shelf (B) can be removed by pulling on the front edge.
To reinstall the shelf, slide it into the side g ...