Windshield and Wiper Blades
Clean the outside of the windshield with glass cleaner.
Clean the rubber blades using a lint-free cloth or paper towel soaked with windshield washer fluid or a mild detergent. Wash the windshield thoroughly when cleaning the blades. Bugs, road grime, sap, and a buildup of vehicle wash/wax treatments may cause wiper streaking. Replace the wiper blades if they are worn or damaged
Wipers can be damaged by:
► Extreme dusty conditions► Sand and salt
► Heat and sun
► Snow and ice, without proper removal
See also:
Rear Seat Pass-Through Door
The vehicle may have a door in the rear seat that provides access to the trunk.
Lower the rear seat armrest to access the pass-through door. Pull the release handle to open the door.
To close, pus ...
Content Theft-Deterrent
Your vehicle is equipped
with a content
theft-deterrent alarm
system.
Here is how to operate the system:
1. Open the door.
2. Lock the door with the power door lock switch
or the remote key ...
What Makes an Airbag Inflate?
In a deployment event, the sensing system sends an electrical signal triggering a release of gas from the inflator. Gas from the inflator fills the airbag causing the bag to break out of the cover and ...