Removing the Spare Tire and Tools
The equipment you will need is located in the trunk.
1. Open the trunk. See Trunk.
2. Turn the center retainer counterclockwise to remove it.
3. Lift and remove the compact spare tire cover.
4. Turn the retainer that secures the jack and wheel wrench counterclockwise and remove the washer.
5. Remove the jack container with the jack and the wheel wrench.
6. Remove the spare tire from the vehicle. See Compact Spare Tire.
The tools you will be using include the jack (A) and the wheel wrench (B).
See also:
Using the Tire Sealant and Compressor
Kit without Sealant to Inflate a Tire
(Not Punctured)
To use the air compressor to inflate a tire with air only
and not sealant:
Always do a safety check first. See If a Tire Goes Flat .
1. Remove the tire sealant and compressor kit from its
stor ...
AM
The range for most AM stations is
greater than for FM, especially at
night. The longer range can cause
station frequencies to interfere with
each other. For better radio
reception, most AM r ...
Reducing Speed While Using
Cruise Control
If the cruise control system is
already activated:
• Move the thumbwheel toward
SET/− and hold until the desired
lower speed is reached, then
release it.
• To slow down in small am ...