Tire Sealant and Compressor Kit Storage

The tire sealant and compressor kit is located in the trunk.

1. Open the trunk. See Trunk 2. Lift the cover.

3. Turn the retainer clockwise and remove the tire

3. Turn the retainer clockwise and remove the tire sealant and compressor kit.

To store the tire sealant and compressor kit, reverse the steps.

    See also:

    Programming with a Recognized Transmitter (Keyless Access Vehicles Only)
    A new transmitter can be programmed to the vehicle when there is one recognized transmitter. To program, the vehicle must be off and all of the transmitters, both currently recognized and new, mus ...

    Approaching a Hill
    When you approach a hill, you need to decide if it is one of those hills that is just too steep to climb, descend, or cross. Steepness can be hard to judge. On a very small hill, for example, there ...

    Using the Re-dial Command
    1. Press and hold for two seconds. The system responds with “Ready” followed by a tone. 2. After the tone, say “Re-dial”. The system responds with “Re-dial using <phone name> ...